Pump Control Valve is a control valve designed to automatically activate and deactivate the pumps used in the pumping lines of water networks.
You can chat with us live in business hours of Turkey in English, Russian, Spannish. If support agent is not available please leave your message and we will be get back to you day after you sent it.
Pump Control Valve is a control valve designed to automatically activate and deactivate the pumps used in the pumping lines of water networks. When the "start" button of the Pump Panel is pressed, the valve is in the closed position. From pressing the start button until the pump finds its speed, the valve opens slowly relative to the pump. When the "stop" button of the Pump Panel is pressed, first of all, the valve is closed slowly without causing a shock. When the valve is fully closed, the pump is turned off with the "Limit Switch" on the valve. In cases such as power cuts, the valve works like a check valve to prevent backflow towards the pump and eliminates the use of an extra check valve in the system.
|Operating pressure||Standard||0.7 – 16 bar (10 – 240 psi)|
|Low Pressure Range||0.5 – 10 bar (7.5 – 160 psi)|
|High Pressure Range||0.7 – 25 bar (10 – 360 psi)|
|Heat||min. Operating temperature||-10 °C (14 °F) DIN 2401/2|
|Max. Operating temperature||80 °C (176 °F) DIN 2401/2|
|Connection||flanged||DIN 2501, ISO 7005 – 2|
|Gear||ISO (BSP), ANSI (NPT)|
|Hydraulic Connections||standard|| Reinforced Nylon (Air Brake)|
Hydraulic Pipe SAE J 844
|Optional||Copper DIN 1057|
|Actuator Type||With Single Control Chamber | With Diaphragm Actuator, With Diaphragm Closure|